*** NEW ADD-ON For Your Existing Slider ***

Add a THIRD dimensions to your current Magnus Slider...

If You've Been Looking For
A Way To Get Even More Out Of
Your Magnus Slider, Then You're
On The Right Page

This new design is essentially an add-on for your "T30" sized Magnus Slider.


I call this new design the RockIt™.


(here's a short video of it in action)

As you can see in the above video...

Not only can you click the RockIt but you can also slide and rotate it like a typical slider (it truly is a double-function design!).

You can also put two RockIt halves together and have a "super click" fidget.

Teflon® (PTFE Sliding Plates)

Just like the old saying goes...


Teflon® (also known as PTFE) may be the greatest thing in slider plates since sliced bread!


9 Months ago I designed and made my first slider with brass insert plates (this had never been done before ...a true world first). I then "dimpled" the design to improve the sliding experience.

After many months of trialing different materials (including bronze, stainless steel, copper, Vesconite plastic, bronze-filled plastic, etc. etc.). Zirconium was the hands-down winner ...and it's what I've been installing in sliders ever since.

However, recent trialing of Teflon® as slider plates has resulted in me questioning using Zirconium.

Don't get me wrong, Zirconium is still #1 (until Teflon® proves itself over time) ...but it's giving Zirconium and damn hard run for it's money!

Screw-In Plates

After epoxy-fitting the slider plates for more than 8 months... I decided it was time to screw them in.

I will openly admit to you right now that I don't think it looks as good with the screws. It's true.

But the sheer number of benefits to screw-in plates vastly outweigh the downside of aesthetics.

We use two custom-made, 2-56 Thread Grade 5 Titanium machine screws to attached each plate. We do not use any sort of epoxy or thread-locker for the screws because (from experience) the "binding" of the titanium threads ensure they do not come loose themselves.

These screws use a standard "T8" Torx head.

Optional Zirconium Plates

At the bottom of this page you can choose which plates you want your RockIt slider to come with.


IMPORTANT: While both Teflon® and Zirconium plates in the RockIt provide a satisfying "click". I will tell you now that the RockIt with the Zirconium plate has a crisper and slightly louder click.

'Hidden' Magnets (No Visible Magnets)

If you know me already, then you know I'm all about clean and minimalist designs.


I've taken the time to ensure there are no magnets visible.


There are SIX magnets behind the plate. The hidden Neodymium magnets are 6mm x 4mm.

Dimensions and Weight

Length: 42mm (1.65")
Width: 30mm (1.18")
Thickness (BOTH sides together): 7.1mm (0.28")

Titanium Body + Teflon® Plates Weight: 25g (0.9 oz)
Titanium Body + Zirconium Plates Weight: 39g (1.4 oz)
Titanium RockIt™
*** Choose Either Teflon® or Zirconium Plates ***
YES! I'm Ready To Order My
Titanium RockIt™ RIGHT NOW
I am aware my Titanium RockIt is IN STOCK RIGHT NOW and will ship next working day.
I understand if the button below says "SOLD OUT", then I have missed this.
I also understand I am choosing between Teflon® or Zirconium sliding plates below:
$119.00

KICK-ASS CUSTOMER SERVICE


Rock-solid customer service that will make you happy.

EXPRESS SHIPPING


All orders shipped using 3-5 Day Worldwide Express Shipping.

MADE IN NEW ZEALAND


Every product we sell is made and shipped from New Zealand.

100% MONEY-BACK GUARANTEE


7-Day Money-Back Guarantee. No questions asked!